Printer compatibility
What has been tested on real printers, from the Nozzle Test Grid: owners run standard tests in the app's Test Mode and send the results, and each result is reviewed before it counts here.
Each printer and firmware is graded on its own; a result on one firmware says nothing about another. Pass means every test in that category passed on a real printer. Not tested means there is no accepted result for it yet, not that it doesn't work. Multi-material printing is graded separately from single-material printing.
| Printer, firmware and materials | Slicing | File transfer | Monitoring | Controls | Printing |
|---|---|---|---|---|---|
| Elegoo Centauri Carbon OpenCentauri COSMOS Release - 26.09.0 · Multi-material · tested with Nozzle It All 0.1.0.testgrid | Slicing: Pass | File transfer: Not tested | Monitoring: Pass | Controls: Not tested | Printing: Pass |
| Elegoo Centauri Carbon OpenCentauri COSMOS Release - 26.09.0 · Single material · tested with Nozzle It All 0.1.0.testgrid | Slicing: Pass | File transfer: Pass | Monitoring: Pass | Controls: Pass | Printing: Pass |
| Snapmaker U1 PAXX extended firmware 1.6.0.267_20260815150420 · Multi-material · tested with Nozzle It All 0.1.0.testgrid | Slicing: Pass | File transfer: Not tested | Monitoring: Pass | Controls: Not tested | Printing: Pass |
| Snapmaker U1 PAXX extended firmware 1.6.0.267_20260815150420 · Single material · tested with Nozzle It All 0.1.0.testgrid | Slicing: Pass | File transfer: Pass | Monitoring: Pass | Controls: Pass | Printing: Pass |
Waiting for testers
The app has tests for these, but no accepted results yet. One suite covers every model of its kind, and each model gets its own row above once tested:
- Anycubic printer in LAN mode on stock firmware (ACE)
- Bambu Lab printer in LAN mode
- Creality printer on its LAN interface (CFS)
- Elegoo Centauri Carbon on OpenCentauri-patched stock firmware
- Elegoo printer on Elegoo stock firmware
- Flashforge printer on its local API (IFS)
- Generic Klipper/Moonraker printer
- Older Flashforge printer (legacy network console)
- Printer on Duet / RepRapFirmware
- Printer on a USB cable (Marlin / Prusa firmware)
- Printer through OctoPrint
- Printer through Repetier-Server
- Prusa printer through PrusaLink
- Snapmaker 2.0 A-series on its touchscreen API
- Snapmaker J1 or Artisan over SACP
- Snapmaker U1 on stock firmware
- UltiMaker printer on its local network API
Most recent result accepted 2026-09-30.
Have one of these printers? Nozzle It All testers can run the tests from the Android app and send the results from inside it. See Test the Android app.
Built from the published compatibility report in the source repository.